Cleaning and storage
Universal 1.1 design incorporates modern technologies, including
nylon lines in the leading edge. That’s why the paraglider should be
carefully packed, with proper conditions ensured for transport and
storage.
Basic rules to be followed when folding the canopy:
<
Fold it accordion-wise rib to rib (cell by cell). Do not fold it by
halves, placing the stabilizers at the centerline.
<
When a compact package is created on the longest chord do
not roll it, but fold three to four times (depending on the chord
length) from trailing edge towards the leading one.
<
The leading edge remains on top of folded canopy.
<
Never pack you paraglider too tightly.
<
Optionally pack the wing into a dedicated WingShell.
If you have completely prepared your gear but have to wait for
launch, a good idea is to use a quickpack, to protect your wing
against moisture and UV rays. Never pack or store the glider when
wet, as it significantly shortens life of the fabric.Remember that the
wing becomes damp even while lying on green grass in direct
sunlight, as the grass transpires.
Caution:
Locking a wet paraglider in a car exposed to sun is
absolutely unacceptable! Hot car interior acts like an oven
and tests have shown that color bleeding/transfer can
happen even at 50 Celsius degree. The warranty does not
cover such damages!
While drying, never expose your paraglider to direct sunlight
operation.
Store the paraglider in a dry place, away from chemicals and UV
exposure. Ideal storage temperature for the paragliders is 5 to 25
Celsius.
Cleaning
Clean the paraglider with water and a soft sponge. Do not use any
chemicals or alcohol, as these can permanently damage the fabric.
Deterioration - a few tips
The paraglider is made mainly of Nylon - a fabric which, like any
other synthetic material, deteriorates through excessive exposure to
UV rays that come with the sunlight.
paraglider care
37
!
Summary of Contents for Universal 1.1 23
Page 1: ...user manual V 07 07 2018 BASIC risers ...
Page 46: ...46 rigging scheme ...