The Run&Fly 2 features four-way,
extremely light risers, equipped with:
•
DBS
(D Brake System) – additional
steering lines, led through guides
attached to D risers. The system is
there to help obtain better flare and
soft landing.
•
BEA
(Brake Elastic Attachment) –
elastic parts fixing the brake handles
to respective risers (instead of
magnets).
Brake handles are attached to the steering
lines at an optimal point, guaranteeing safe
and e
ff
ective action.This point is marked on
the line with a black dot and this setting
should not be altered. Attaching the
handles above factory markings will cause
constant braking of the paraglider, possibly
cause of an accident. Overly loose setting
of the brake lines is not advised too, since
the much lower load on the trailing edge
lines can sometimes be dangerous too.
For quick and easy recognition in
emergency, some of the risers are
distinguished with coloured covers as
follows:
•
A
- red (used for launching if
necessary)
•
B
- yellow (used for B-stall).
For even easier identification, the risers are
additionally marked by their covers:
•
A and B
: red stripes.
•
C and D
: blue stripes.
Riser scheme
581 )/<