25
POWERSEAT LIGHT
All materials for the harness were carefully selected for their quality
and durability. Keeping the harness in good order and condition will
grant you satisfying operation for a long time.
The harness is best cleaned with a wet sponge, maybe a bit of soap.
Do not use detergents or solvents. If there is a lot of mud, use the
brush first before wet cleaning.
In case of completely soaked harness (e.g. after water landing) dry it
in a well aired place, away from direct sun operation. Soaked rescue
chute always has to be completely removed from the harness, dried
and packed again by a licensed person.
In case of a long-time storage keep it either in the backpack or loose,
but in any case in a well ventilated room, away from sun rays.
Unfortunately certain discoloration of some harness parts is
unavoidable over time and this is yet another reason for not exposing
it to the sun more than necessary
STORAGE AND CLEANING
