Ducati Superbike 848evo Corse, Owner'S Manual

Page: 116 / 144

115
The side position of the left beam can be corrected
using the screw (1, fig. 83) on the rear side of the
headlamp. Turn the screw clockwise to move the
beam to the right, counter clockwise to move it to the
left.
The height of the left beam can be corrected using
the screw (2, fig. 83) on the rear side of the
headlamp. Turn the screw clockwise to lower the
beam, anticlockwise to raise it.
Repeat the above procedure to adjust the right-hand
headlamp.
Warning
The headlight might fog up if the vehicle is used
under the rain or after washing.
Switch headlight on for a short time to dry up any
condensate.
Rear-view mirror adjustment
(fig. 84)
The rear-view mirror can be adjusted manually by
pressing on point (A).
1
2
fig. 83
A
fig. 84