101
Checking and topping up coolant level
(fig. 66)
Check coolant level in the expansion tank on the right
side of the vehicle. It should be between the two
marks (1) and (2). Mark (2) indicates MAX level; mark
(1) indicates MIN level.
Top up if the level is below the MIN mark.
Remove the right-hand side fairing (see page 96).
Unscrew the filler plug (3, fig. 66) and add a mixture
consisting of water and antifreeze SHELL Advance
Coolant or Glycoshell (35÷40% of the volume) up to
MAX mark.
Refit the filler plug (3) and reassemble all removed
parts.
This type of mixture gives the best operating
conditions (the coolant starts to freeze at -20 °C/-4
°F).
Cooling circuit capacity: 2.3 cu. dm (litres).
Warning
Place the motorcycle upright on a flat surface
and make sure the engine is cold before proceeding.
MAX
MIN
3
2
1
fig. 66
Summary of Contents for Superbike 848evo Corse
Page 1: ...cod 913 7 205 1A...
Page 2: ...1 ENGLISH Owner s manual...
Page 143: ...Stampato 10 2012 Cod 913 7 205 1A...
Page 144: ...cod 913 7 205 1A...
