96
Main maintenance operations
Removing the fairing
Some parts of the motorcycle fairing have to be
removed for certain maintenance or repair
operations.
Warning
If parts that have been removed are not refitted
correctly they may become loose suddenly while
riding and cause you to lose control of your
motorcycle.
Important
At reassembly always fit nylon washers when
tightening fastening screws to avoid damage to
painted parts and Plexiglas windscreen of headlight
fairing.
Side fairings
To remove the fairings, use the Allen wrench
accommodated under the seat to loosen the
following:
the two screws (1) securing the fairing panels to the
brackets;
the six screws (2) securing the fairing panels to the
headlight fairing;
the four screws (3) securing the fairing panels to the
frame;
the two screws (4) located under the fairing that join
the right fairing panel to the left fairing panel;
the two screws (5) securing the fairing panels to the oil
cooler;
the two screws (6, fig. 60) securing the front of the
fairing to the headlight fairing.
4
5
1
2
3
fig. 59
Summary of Contents for Superbike 848evo Corse
Page 1: ...cod 913 7 205 1A...
Page 2: ...1 ENGLISH Owner s manual...
Page 143: ...Stampato 10 2012 Cod 913 7 205 1A...
Page 144: ...cod 913 7 205 1A...
