A
B
C
D
E
F
G
H
L
M
N
P
Motore
Engine
sezione / section
N 6.2
120
749R
- M.Y. 2006 - edizione/edition 00
Ricomposizione
coperchio frizione
Se è stata sostituita, installare la
boccola (
10
) all’interno della cava
nel coperchio frizione utilizzando un
tampone adatto o una pressa per
spingerla in battuta.
In caso di sostituzione dell'anello di
tenuta (11), rimontare il particolare
nuovo all'interno del coperchio
frizione disponendolo con il lato
sprovvisto di molla rivolto verso il
seeger (13).
Verificare prima del montaggio che gli
spigoli della cava del seeger siano
esenti da bave che potrebbero
danneggiare l'anello di tenuta.
Inserire poi il rasamento (12) e il
seeger (13).
Importante
Affinché l'anello di tenuta (11)
lavori correttamente, deve risultare un
gioco di montaggio tale da permettere
la rotazione del seeger (13).
Se è stato rimosso, installare l'anello
di tenuta (6) nuovo sul coperchio
frizione, posizionato con il lato
provvisto di molla rivolto verso
l'interno (vedi figura), e lubrificare i
labbri di tenuta con olio motore.
Montare il tappo (
3
) e la
guarnizione (
7
). Montare il sensore (
9
)
e la guarnizione (
8
). Montare il
tappo (
16
) e la guarnizione (
17
).
Reassembly of the clutch
cover
If renewed, fully seat bush (
10
) in the
clutch cover with a suitable drift or
a press.
If the oil seal (11) needs to be replaced,
fit the new seal into the clutch cover,
positioning it so the side without a
spring is facing the circlip (13).
Before fitting, check that the edges
of the circlip groove show no sign of
burrs which might otherwise damage
the seal.
Then fit the shim (12) and the
circlip (13).
Important
In order for the oil seal (11) to
function correctly, it must have an
assembly clearance that allows the
circlip (13) to rotate.
If it has been removed, install the
new oil seal (6) in the clutch cover,
with the spring side facing inwards
(see figure), and lubricate the seal lips
with engine oil.
Fit plug (
3
) and gasket (
7
).
Fit sensor (
9
) and gasket (
8
).
Fit plug (
16
) and gasket (
17
).
13
12
11
6
Summary of Contents for Superbike 749R 2006
