background image

236

Performance data

Maximum speed in any gear should be reached only 
after a correct running-in period with the motorcycle 
properly serviced at the recommended intervals.

Important

Failure to follow these instructions will release 

Ducati Motor Holding S.p.A. from any liability for any 
engine damage or shortened engine life.

Spark plugs

Make:
NGK
Type:
MAR09A-J

Fuel system

MITSUBISHI indirect electronic injection type: 
a/n / a/n.
Oval throttle body (corresponding diameter):
67.5 mm
Injectors per cylinder: 2
Firing points per injector: 12
Fuel specifications: 95-98 RON.

Warning

The vehicle is only compatible with fuel having 

a maximum content of ethanol of 10% (E10). Using 
fuel with ethanol content over 10% is forbidden. 
Using it could result in severe damage of the engine 
and motorcycle components. Using fuel with ethanol 
content over 10% will make the warranty null and 
void.

Summary of Contents for Superbike 1199 panigale S





























































































































































































































































Reviews: