28
E
When you switch the LAP function off using the menu,
the lap in progress is not saved.
If the LAP function is active and the instrument panel is
suddenly switched off (Key-Off), the LAP function is
switched off automatically (even if the timer was ON,
the lap in progress is not saved).
If the timer is not stopped, when it reaches 99 minutes,
59 seconds and 99 hundredths, it restarts from 0 (zero)
and continues until the function is switched off.
If however the LAP function is switched on and the memory
has not been cleared, but fewer than 30 laps have been
saved (e.g. 18 laps), the instrument panel will save any
remaining laps until the memory is full (in this case, it will
save a further 12 laps).
In this function, only the lap time is displayed, but other data
are also saved (MAX speed, MAX rpm, rev limiter if reached)
for viewing at a later date in the Lap Memory function.
Press Flash
After 10 secs.
Press Flash
After 10 secs.
fig. 22
