![background image](http://html1.mh-extra.com/html/ducati/superbike-1098-r-bayliss/superbike-1098-r-bayliss_owners-manual_2537762028.webp)
27
E
LAP time display function
This function displays the recorded lap time.
To activate this function, go into the menu and set the “LAP”
function to “On” by pressing switch (1, fig. 10) in position B
“
▼
” for 3 seconds.
START and STOP the timer by pressing the high beam
FLASH button (12, fig. 5) on the left-hand handlebar switch.
When the LAP function is active, each time you press the
flasher switch, the display will show the lap time for
10 seconds, before reverting to normal mode.
You can save a maximum of 30 laps in the memory.
If the memory is full, each time you press the flasher
switch, no more lap times can be saved and the display
will show the flashing message “FULL” for 3 seconds
until the memory is reset.
fig. 21
Summary of Contents for SUPERBIKE 1098 R BAYLISS
