26
E
Adjusting the position of the gearchange
and rear brake pedals
The position of the gearchange and rear brake pedals in
relation to the footrests can be adjusted to suit the
requirements of the rider.
To adjust the position, proceed as follows:
restrain the tie-rod (1) and slacken the locknuts (2) and (3).
Notes
The locknut (2) has a left-hand thread.
Turn the tie-rod (1) using an open-ended wrench on the flats
to move the gearchange pedal to the required position.
Tighten both nuts on to the rod.
2
1
3
fig. 17
Summary of Contents for SPORTCLASSIC SPORT 1000
Page 1: ...1 E Use and maintenance manual SPORT 1000...
Page 2: ...2 E...
Page 80: ...80 E...
Page 85: ...E USA 85 1 1 6 5 7 2 8 4 6 only Canada 3 Label location fig B fig B...
