13
E
LCD functions
When the engine is switched on (key turned from
OFF
to
ON
),
the instrument panel performs a check of all the instruments
(dials, display, warning lights), see (fig. 5 and fig. 6).
LCD functions (1)
By pressing button (A, fig. 6) with the key turned to ON,
you can cycle between display of the trip counter and the
odometer and, if the fuel level warning light is on, the
fuel reserve trip counter.
Resetting the trip meter
If button (A, fig. 6) is held pressed for more than 2 seconds
while the
TRIP
(trip meter) is active, the display is reset
(LCD 1).
LCD functions (2)
If button (B, fig. 6) is pressed with the ignition key at ON,
the display shows the clock and the oil temperature.
Setting the clock
Press (B, fig. 6) for at least 2 seconds and the time will be
shown in display (2, fig. 6).
Select AM/PM by pressing button (A, fig. 6). Press button
(B, fig. 6) to select the hour setting function. Press (A)
repeatedly to change the hour indication. Press button (B)
to change to the minute setting function.
Press button (A) to increase the minutes; hold the button
pressed for more than 5 seconds to increase the rate of
change. Press button (B) to exit the clock setting function.
KM/H
MIN x
1000
-1
OFF
fig. 5
TOT
TRIP
C
F
A
M
P
M
TOT
TRIP
C
F
A
M
P
M
KM/H
MIN x
1000
-1
CHECK
1
A
B
2
fig. 6
Summary of Contents for SPORTCLASSIC SPORT 1000
Page 1: ...1 E Use and maintenance manual SPORT 1000...
Page 2: ...2 E...
Page 80: ...80 E...
Page 85: ...E USA 85 1 1 6 5 7 2 8 4 6 only Canada 3 Label location fig B fig B...
