Ducati Scrambler 1100, Owner'S Manual

Page: 81 / 247

When you press button (4) to confirm the fourth and
last digit, the MEM item frame (C, Fig. 49) is flashing.
Now you can use buttons (1) and (2) to do the
following:
- select "EXIT" (flashing frame) and press button (4)
to quit without saving the PIN CODE;
- select every figure (flashing) of the set code and
press button (4) to edit them and repeat the code
entry procedure;
- select "MEM" (flashing frame) (C, Fig. 49) and
press button (4) to save the new PIN CODE.
The instrument panel will then show “MEM OK”
for 2 seconds, then will show "EXIT" with flashing
frame.
To quit, press button (4).
Once the first PIN CODE is stored, this menu page is
no longer available and is replaced by the page for
changing the PIN CODE. The page for entering the
very first PIN CODE is active and available again only
in case the PIN CODE function is reset, but this is only
possible at a DUCATI Authorised Dealer.
1
2 4
Fig. 50
80