Ducati Scrambler 1100, Owner'S Manual

Page: 166 / 247

Seat lock
Opening
Insert key (1) inside lock, positioned under splash
guard, turn it clockwise and, at the same time, to
make pin release easier, press on seat (close to latch).
Remove the seat (2) pulling it backwards until sliding
it out of the front retainers.
Warning
When you are about to insert key inside seat
lock, do not touch the exhaust system with your body
since silencers remain hot for a long time after engine
switching off.
Closing
Make sure all parts are correctly laid out and secured
in the underseat compartment.
Slide the front end (A) of the seat bottom underneath
the retainer (B) of the frame support.
Press on seat (2) rear end until locking latch snaps.
Make sure the seat is safely secured to the frame and
remove the key (1) from the lock.
1
Fig. 134
2
A
Fig. 135
165