Trip Master Controls
From the Interactive Menu select the “Trip Master”
item and press the joystick in the middle. The
corresponding window is then displayed with the
following controls available:
-
“ON” or “OFF”
-
pause or play
to interrupt and resume Trip Master's
calculation. When paused, the calculated
distance flashes.
-
reset
to reset the meter.
-
incremental or differential
to change the partial distance calculation mode.
Using the LH and RH positions of the joystick
you can select the available controls, which can be
activated by pressing the joystick in the middle.
Trip Master activation and deactivation
If the Trip Master has not been previously activated,
the relevant window is displayed with “ON” selected:
press the joystick in the middle to activate the Trip
Master. Then “OFF” is displayed and the Trip Master
controls are activated.
If the Trip Master has been previously activated, the
relevant window is displayed with “OFF” selected:
press the joystick in the middle to deactivate the Trip
Master. The Trip Master controls are then
deactivated.
Press and hold the joystick in the DOWN position
for a long time to switch to the trip info menu
selection while keeping the Trip Master window
active. In this case you can go back to the Trip Master
window by pressing and holding the joystick in the
UP position for a long time.
Fig 33
41
