ABS
This function allows disabling and enabling the ABS
system and is only available in the Enduro Riding
Mode.
From the Interactive Menu select the “ABS” item and
press the joystick in the middle. The corresponding
window is then displayed in which the current status
of the function is displayed: “ABS ON” or “ABS OFF”.
Press the joystick in the middle to change the
function status: “WAIT...” is displayed for a few
seconds, then the function status is updated.
In case of an error on the ABS, “ERROR” is displayed
during deactivation (OFF).
Press and hold the joystick in the DOWN position
for a long time to switch to the trip info menu
selection while keeping the ABS window active. In
this case you can go back to the ABS window by
pressing and holding the joystick in the UP
position for a long time.
Press and hold the joystick in the LH position for a
long time, the instrument panel will return to the
previous screen closing the ABS window.
Fig 30
Fig 31
39
