Ducati Multistrada 1200S ABS, Owner'S Manual

Page: 163 / 206

162
E
Replacing the high and low beam bulbs
Before replacing a burnt-out bulb, make sure that the new
bulb complies with the voltage and wattage specified in the
“Wiring diagram”, page 185. Always test the new bulb
before refitting any parts you have removed.
fig. 177 shows the locations of the low beam bulbs (LO), high
beam bulbs (HI) and the parking light bulb (1).
Headlight
To access the right or left side headlight bulbs, remove the
corresponding panel, proceeding as follows.
Note
The figures show the replacement of the right side
headlight bulbs: the procedure is the same for the left side.
Remove the panel cover (2, fig. 178).
1
LO
HI
LO
HI
fig. 177
2
fig. 178