Ducati MULTISTRADA 1100, Use And Maintenance Manual

Page: 43 / 114

42
E
1100
STANDARD rebound damping setting (1):
screw the adjuster fully in (clockwise), then screw it out
18 clicks.
STANDARD compression damping setting (2): screw the
adjuster all the way in (clockwise), then screw it out by
2 turns.
The preload on the outer spring of the shock absorber can
be adjusted by way of the knob (3) located on the right-hand
side of the frame; follow the instructions given on the
adjuster itself.
The STANDARD setting is obtained when the knob is in the
minimum position (LOW).
STANDARD length of “mini-preload” spring: 4 turns (2 mm).
Warning
The shock absorber is filled with gas under pressure
and may cause severe damage if taken apart by unskilled
persons.
1
S
H
S
H
2
S
H
H
S
fig. 34.1
1100
3
HIGH HIGH
LOW LOW
fig. 34.2
1100