Ducati MONSTER 1200 s, Owner'S Manual

Page: 234 / 337

Adjusting the position of the gearchange
pedal and rear brake pedal
The position of the gearchange and rear brake levers
in relation to the footpegs can be adjusted to suit the
requirements of the rider.
Gear change pedal (Monster 1200)
To adjust the position of the gearchange lever,
proceed as follows: hold the linkage (1) and slacken
the lock nuts (2) and (3).
Note
Nut (2) has a left-hand thread.
Fit an open-end wrench to hexagonal element of
linkage (1) and rotate until setting pedal in the desired
position. Tighten both lock nuts onto linkage.
2
3
1
Fig. 151
233