Ducati MONSTER 1200 s Owner'S Manual Download Page 121

Page: 121 / 337

Error warnings

The instrument panel manages error warnings in

order to allow the rider to identify any abnormal

motorcycle behaviour in real time.

Upon Key-On, in case of errors, the instrument panel

turns on the MIL light (B) (in case of errors directly

connected to the engine control unit) or the Generic

Error light (A) (in case of any other errors).

During normal operation, when an error is triggered,

the instrument panel turns on the MIL light (B) or the

Generic Error light (A).

Warning

When one or more errors are displayed, always

contact a Ducati Dealer or authorised Service Centre.

120

Summary of Contents for MONSTER 1200 s


















































































































































































































































































































































Search results

Summary of Contents for MONSTER 1200 s

Reviews:

Brands by name

Popular brands

Ducati MONSTER 1200 s, Owner'S Manual

Search results

Summary of Contents for MONSTER 1200 s

Reviews:

Brands by name

Popular brands