11
5~6 Nm
5~6 Nm
IMPORTANT!
Locate where the tire valve is and then remove the cap from the valve to add air to your
tires. Use a tire inflator with a tire gauge to make sure the tire pressure is the same as
the marks on the side of the tire. Make sure if there is any abnormal sound while airing
the tire and check the appearance. Check if the tire fits with the rim tightly. Put the valve
cap back tightly if no problems are found.
3. Adjust the handlebar set to the
proper position.
4. Adjust the handlebar set to the
correct position. There should be a
90 angle between the front tire and
the handlebar set.
5. Fasten the screws according to the
standard torque value.
6. Put the stem cover on. Complete!