Ducati Diavel ABS 2012, Owner'S Manual

Page: 100 / 224

98
Stored LAP display function
This function displays the stored LAPs.
To access the function it is necessary to view the
“setting” menu page 48, using button (1, fig. 23)
“
▲
” or (2, fig. 23) “
▼
” select the “LAP” function and
press the reset button (12, fig. 21) to go to next page.
Use button (1, fig. 23) “
▲
” or (2, fig. 23) “
▼
” to
select “LAP DATA” indication and press the reset
button again (12, fig. 21) to enter the page showing
the previously recorded lap times.
The dashboard displays the information as follows:
- at top left, the number of the displayed lap (e.g.
LAP N.01);
- at bottom left, a rectangle inside which is the lap
time (TIME), top speed in that lap (SPEED MAX)
and top rpm in the same lap (RPM MAX);
- on the right, use button (1, fig. 23) “
▲
” or (2,
fig. 23) “
▼
” to select “NEXT” (so that every time
the reset button is pressed (12, fig. 21) the next
lap is displayed) or “PREV” (so that every time the
reset button is pressed (12, fig. 21) the previous
lap is displayed).
To exit, select “EXIT” and press the reset button (12,
fig. 21).
Note
The MAX stored speed is indicated on the
display (increased by 5%).
If no lap times are saved in memory, “NO LAP”
indication is displayed and lap timer will indicate
“-.- -.- -”, MAX rpm will be = - - - - - - and
MAX speed = - - - - -.
Note
If the stored times are deleted while the LAP
function is active, it will be automatically deactivated.
ProCarManuals.com