6
Installation instructions
Gateway
Connect the gateway to the router
using the Ethernet cable
1
Connect the USB cable
2
to the
Gateway and the power supply
supplied .
Wait two minutes and refer to the
Gateway LED lights to check that
it is communicating correctly with
the router .
It is preferable to register the
Gateway before installing it .
go to page 9 to see how to register
the Gateway
If it is registered after installation,
it may take a few minutes to be
accessible from the web page, if
you do not want to wait, disconnect
and then reconnect the power
supply to the Gateway .
micro USB
ethernet
green
orange
The Gateway status is indicated via its LED lights:
Green off, orange flashing one second:
discovery status (device pairing) .
Orange on, green flashing 0.2 seconds:
the
router has not assigned an IP address to the
Gateway .
Orange on constantly, green flashing briefly
every 5 seconds:
the router has assigned an IP
address to the Gateway correctly, but there is no
communication with the server .
Orange on, alternating with green flashing
briefly every 5 seconds:
the Gateway has
connected to router correctly and has internet
connection .
Status of Gateway lights
Installation instructions
Summary of Contents for Smart Command Tevolve
Page 15: ...15 Notes about installation...
