11
orange
green
Installation instructions
Please Note:
Paired devices will show in the order
they were added onto the system and will be called
Radiator1, Radiator2 etc . We highly recommend
renaming each radiator as they are paired to avoid
confusion . To do this select the paired radiator and
press the settings icon where you can rename
it .
Without App method
If you don’t have the access to
the
App
or are unable to pair using the
method above , press the Link
button on the Gateway
3
for
3 seconds .
Once the orange LED starts to
flash, follow the method described below for your
device .
Pairing Devices to the
Gateway
App method
Once the Gateway is connected to the Internet and
registered to your
account
heaters and energy monitor must be paired to it .
To do this ensure you are logged into the App and
press the + icon on the home screen, then follow
the on-screen instructions .
No devices were found in this home. To
add a new one click on the button with the
symbol .
Smart Command tevolve
Friday 19th Nov 2021, 11:29
Avant DGi+ Radiator / Vitro-i+
Press the CONFIG button on the heater and use
the + or - button until the RF icon flashes. Then
press OK .
‘Link’ together with an antenna icon will appear in
the top right of the screen .
Your Avant DGi+ / Vitr o i+ is now connected to the
Gateway .
Summary of Contents for Smart Command Tevolve
Page 15: ...15 Notes about installation...
