4
•
All repairs where required must be completed by the manufacturing company or by
special authorised staff.
•
If the heater is sold without cable and plug or any other disconnecting method, the
installer must incorporate a disconnecting device taking into account the specific
regulations that apply.
•
This heater has been designed and created as a fixed heating device and must be used
for this purpose only.
•
The heater must be mounted directly to the wall using the brackets supplied with the
heater.
•
Do not place the heater directly on the floor.
•
Make sure that the wall where the heater is going to be mounted is suitable to bear the
heater’s weight.
•
Use the correct fixing for the type of wall the heater is to be mounted onto.
•
Make sure that the electrical power supply corresponds to the information indicated on
the heaters rating label.
•
The heater must be levelled correctly both vertically and horizontally.
•
When the heater is operational, the power cord must be totally unrolled and must not
touch the surface of the unit.
•
Do not operate the heater with wet hands.
•
Before undertaking any type of maintenance, ensure that the heater is disconnected
from the power supply by removing the fuse from the spur outlet.
