background image

10

 

 

-

 

Make sure that all nuts, bolts and screws are kept well tightened to keep the 

lawnmower in a safe operating condition.

 

-

 

Never store the lawnmower with a tank with gasoline in an enclosed area where 

gasoline fumes could reach a strong heat source or a flame. Allow the engine to cool 

down before you store your lawnmower in any storage place.

 

-

 

In order to reduce any risk of fire, clean the lawnmower and in particularly the

 

engine, the muffler, the fuel tank. Suppress all grass traces or leaves or excess of grease.

 

-

 

Check frequently the condition of the deflector and the grass catcher, replace them if 

the are damage.

 

-

 

In case of drain oil of the tank before winter, do this operation outside.

 

-

 

Wear thick gloves for the mounting and the sharpening of the blade. Be sure that the 

blade is always well balance.

 

8-MAINTENANC

 

 

WARING: 

stop the engine and unplug the spark plug 

before any repairing or maintenance operations.

 

Stop the engine and unplug the spark plug before any repairing or maintenance 

operations.

 

-

 

For four strokes engine read carefully the maintenance engine manual. Check 

regularly the oil level and add some oil or replace it if necessary.

 

-

 

Frequently check the lawnmower and ensure that all grass deposits are removed from 

beneath the deck.

 

-

 

Lubricate regularly the wheel axle and the bearings with grease.

 

-

 

Check often the blade, in order to obtain a clean work the blade should always be 

sharp and well balance.

 

-

 

At regularly intervals check the tightening of all bolts and screws. Wear off or badly

 

-

 

tightening nuts and bolts can involve some important damages to the engine or the 

frame.

 

-

 

If the blade hits violently an obstacle, stop the lawnmower and bring it to agreed 

service station.

 

THE BLADE: the blade is made of pressed steel, in order to obtain a clean work 

sharpen the blade frequently, around every 25hours of work. Be sure that the blade is 

always well balance, introduce a small iron axle(φ2 or φ3 mm) in the central hole of 

the blade, it should stay horizontal .If the blade does not stay horizontal balance it by 

taking off some metal on the side, which is down.

 

Summary of Contents for 161CC













Reviews: