Standby Time
Bluetooth Mode Setting
This configuration enables the time configuration for the main power
switching off after scanner LED turned off.
(1) Enter
(2) Standby Time barcode
(3) Scan parameters from Hexadecimal /
Decimal table
(Range:0~99 = 0~99sec)
(4) OK
(5) End
Separator
This configuration enables separator setting in between date, time and
barcode data. In order for the date and time to be display in front of each
barcode data, Date & time transmission must be enabled.
(1) Enter
(2) Separator barcode
(3) Scan parameters from Hexadecimal /
Decimal table
(Max:1digit)
(4) OK
(5) End
BT List
Enter
List
User can simply understand their Bluetooth
parameter setting by scanning the following
barcode, and use the notepad to receive the
Bluetooth parameter configuration data.
BT Default Setting
Enter
Default
User can restore the default setting for the
Bluetooth Parameter.
The configuration enables the setting of duration time of scanner LED
power on and off
Lamp Off Delay
(1) Enter
(2) Lamp Off Delay barcode
(3) Scan parameters from Hexadecimal /
Decimal table
(Range:0~255 = 0~255sec)
(4) OK
(5) End
12
11
