Memory Mode
Switch from Bluetooth to Memory Mode
Send
Connect the USB cable between scanner
and PC, and scan the below “Send” barcode.
Clear
Clear all barcode data in the memory
Bluetooth mode configuration
Enter
End
Mode
Slave Mode : Third party Bluetooth devices ( Mode:0)
Master Mode - Third party Bluetooth devices (Mode:1)
Econnect Bluetooth dongle Mode I (Mode:2)
HID Mode - For third party Bluetooth devices (Mode:3)
iPad OSK MODE (Mode selection code:4)
Econnect Bluetooth dongle Mode II (Mode:5)
OK
BT Local name
Enter
BT Local name
OK
End
Set Local name as ‘BT Scanner’
(A) Scan “BT Module Enter” barcode
(B) Scan “BT Local name” barcode
(C) Scan parameters from Hexadecimal / Decimal
barcode table =>“4”,”2”,
“5”,”4”, “2”,”0”, “5”,”3”, “6”,”3”, “6”,”1”, “6”,”E”, “6”,”E”,
“6”,”5”, “7”,”2”
→
”OK”(configured as ‘BT Scanner’,
Please refer to ASCII TABLE)
(D) Scan “End” Barcode
3
4