1.3.2. PVC stripper and glue
It is important to strip and glue each PVC element well. Comply with the manufacturers' recommendations for
use.
Immediately after stripping each part, first glue the fitting thoroughly, then the end of the pipe. Fit the end of this
pipe into the fitting by turning slightly so that the glue is evenly distributed and until each element is properly in
place.
Hold the assembly for 5 or 10 seconds to allow a good grip.
Finally, remove excess glue from the gasket and the pipe.
1.3.3. Various
Depending on your plans, you will need other connection elements and materials such as PVC valves, stain-
less steel screws, silicone sealant, etc.
Make sure these are quality products that will withstand direct exposure to the sun over time.
1.3.4. Tools
Your installation will be easier if you have well prepared your plans and if you have the necessary tools and
materials for your work.
The tools you will need are as follows:
• flat and cruciform screwdriver,
• electric drill with drill bits and plugs,
• metal saw,
• sanding paper,
• PVC stripper,
• glue gun,
• water pump pliers,
• ladder.
Installation, use, maintenance manual - DualSun solar heating system for individual
swimming pools
5
