310011 G16NE
6/6
KNOW YOUR WAFFLE MAKER
The hardworking stainless steel ‘Waffle Maker’ make delicious waffles. The machine is made
from satin finish, top grade stainless steel and each plate is coated with two layers of
Non-stick material. The Hotplates can be turned on individually for greater economy.
OPERATING INSTRUCTIONS
1. Before use remove screws on handle and clamp and fit plastic handle over clamp and
screw on tightly.
2. Both sets of plates can be switched independently.
3. Pre-heat Waffle Plates for 8 minutes.
4. Very lightly oil the top and bottom waffle plates before using for the first time. Thereafter
it is only necessary to smear a little oil after making a few waffles.
DO NOT OVER OIL
,
as this will cause staining of the exterior surfaces.
5. Pour one large tablespoon of the mixture in the middle of the grid.
6. Close the lid and allow to cook for a couple of minutes.
7. Lift the lid and remove the waffle with plastic tongs or spatula
NEVER USE METAL
UTENSILS.
8. It is imperative that the waffle plates are wiped over with a damp cloth after each use to
prevent carbon build up.
9. After each day’s use, allow to cool. Use a
NYLON BRUSH
and clean
ALL
signs of
grease off the plates and then Wipe over with a clean damp cloth.
10. Never immerse the waffle iron in water.
11. Shut off power when not in use and disconnect from wall socket.
CLEANING
DAILY CLEANING
Ensure that the waffle maker is disconnected from the electricity supply before attempting any
cleaning. Use a damp cloth and clean thoroughly.
IF CARBON HAS BUILT UP
A damp BRILLO pad can be used to remove carbon build up. Ensure that all traces of the
cleaning agent are removed before toasting.
Lightly oil the plates for a few uses after
cleaning.
IT IS IMPERATIVE THAT THE CLEANING INSTRUCTIONS ARE
COMPLIED WITH.
POWER SWITCH
FEET
HANDLE
WAFFLE PLATES
