Dualit BABY 11060, Instruction Manual & Guarantee

Page: 8 / 21

14 15
1
4
2 3
Carefully push the Blade
Seal onto the Blade Hub,
ensuring it sits properly
into the recess at the top.
Caution: The blades are
very sharp.
Turn the Blade Hub
anti-clockwise until the Blade
Assembly cannot be turned
further.
Holding the Blade Hub from
the top, carefully insert the
Blade Assembly down into
the Blender Jar. Note: you
may wish to use a tea towel
to insert the blade and
protect your fingers.
Turn the Blender Jar so it is
resting on its side.
ASSEMBLING YOUR BABY FOOD MAKER CONT.
TO INSERT THE BLADE ASSEMBLY
Be careful when handling the Blade Assembly. Caution: Blades are very sharp.
ASSEMBLING YOUR BABY FOOD MAKER CONT.
TO REMOVE THE BLADE ASSEMBLY
Be careful when handling the Blade Assembly. Caution: Blades are very sharp. Jar may
be hot, risk of burning. Allow to cool before removing the Blade Assembly.
4
Carefully remove the Blade
Seal from the Blade Hub by
pulling it out and down.
Caution: The blades are
very sharp.
1 2 3
Remove the Blender Jar
from the Base and remove
the Lid and Steaming Basket
from the Blender Jar.
Turn the Blender Jar so it is
resting on its side with the
blades facing away from you.
Turn the Blade Hub clockwise
and gently push the Blade
Assembly through into the
Blender Jar. Always hold the
Blade Hub, not the blades.
Note: You may wish to use a
tea towel to lift out the blade
and protect your fingers.