10
11
2
3
Fill the Water Tank with
water; do not go above the
‘MAX’ mark. You will see air
bubbles at the connection
when correctly located.
Plug in Power Cord. Press
Button to turn ‘ON’. The
Thermobloc Water Heater
system is now heating to the
correct temperature.
7
If you like your coffee extra
hot, the serving cup or mug
must be warmed through
before
EACH
coffee or tea.
Dispense a cup full of water,
then discard the water.
PRIMING -
BEFORE EACH USE
The Brewhead, Filter Holder and cup must be the correct operating
temperature before the first use. Thereafter, subsequent cups must be
pre-warmed before
EACH
coffee.
CHOC
PODS
MILK
Your machine is ready to go.
8
READY
WARM CUP
TURN
ON
FILL WATER TANK
U
N
PL
U
G
WH
EN NO
T IN
U
SE
DON’T FORGET
TO
REGISTER
YOUR PRODUCT
WWW.DUALIT.COM/REGISTER
OR BY POST
1
Register your appliance at
www.dualit.com
. This will
only take 60 seconds. You
will need the product model
and serial numbers that are
on the rating label on the
base of the product.
REGISTER MY
APPLIANCE
THE CAPSULE PIERCING TOOL
Choose your capsule (if your capsule does not require piercing, skip to page 12).
CAPSULE TYPES
PIERCER REQUIRED TO ACTIVATE CAPSULE & INDUCE EXTRACTION
Nespresso
®
* Capsules
Dualit Compostable
+
Capsules
Dualit Aluminium
Capsules
Not required
Yes required
1
CAUTION! Capsule Piercing Tool has sharp blades, use with care.
6
Dispense a cup full of water
(min 240ml) through the
machine. Ensure
NO
coffee
is in the Cup Filter Holder.
4
The temperature neon will
go out once the Thermobloc
is at the correct operating
temperature.
WAIT 40 SECONDS
PRE-HEAT FILTER
HOLDER
Align the Holder with
the open lock symbol,
insert then rotate 60° past
the closed lock symbol.
Ensure the Holder
is fully locked before
dispensing.
5
ATTACH HOLDER
LOCK
*
Suitable for Nespresso
®
drop through machines, excluding professional machines and ‘built-in’ models.
Nespresso
®
trademark is owned by Socété des Produits Nestlé S.A.
+
Suitable for industrial composting through authorised food waste collection schemes.
