XGPS170D
11
automatically turns off Bluetooth, so it must be
manually turned back on. The recommended
procedure with the iPad/iPhone/iPod is to activate
Airplane Mode, turn Bluetooth back on and then
turn on the XGPS170D.
NOTE: The battery in the XGPS170D is already
partially charged and the device should turn on
the first time you take it out of the box. If the
device does not turn on, please charge it from a
USB source before continuing - see
Charging
on
page 15.
NOTE: If your device requests a code to con-
nect during the pairing process, use “0000” or
“1234”.
Pairing the XGPS170D with the iPad, iPod
touch or iPhone
(NOTE: these instructions were written using iOS
version 10.0 and may be different if you are using
a different version of the iPhone OS.)
• Turn on the XGPS170D. The blue Bluetooth
status light on the XGPS170D will start blinking
slowly (about once per second).
• On the iPad/iPod touch/iPhone, go to:
Settings->Bluetooth
and turn on Bluetooth. The device will automati-
cally begin looking for the XGPS170D.