12
XDM290BT
OPERATION
USB Operation
To play MP3 files from most USB mass storage devices,
line up the USB connector and insert the USB device into
the unit's USB port.
When a USB device is first connected, “USB READ”
will appear in the display and playback will begin
momentarily. Depending on the number of files and
folders, it may take several seconds for the device
to begin playing. If no valid MP3 files are detected,
“NO FILE” will be displayed and the last mode will be
resumed.
Press
TRACK
ll
to skip to the beginning of the next
track. Press
TRACK
nn
to return to the beginning of
the current track. Pressing
TRACK
nn
again skips to
the beginning of the previous track.
Press and hold
TRACK
ll
or
TRACK
nn
to fast
forward or reverse a track.
Press
l
/
II to temporarily stop USB playback.
Press
l
/
II again to resume playback.
Press
SELECT
to enter the file/folder search mode. A list
of all the folders from the USB device will be displayed.
Note:
Any files located in the root directory will be
located in the folder named "ROOT". Press
SELECT
to
view the files on the root folder.
Turn the volume knob to cycle through all the folders
on the device and press
SELECT
to choose the desired
folder. The list of files in the selected folder will be
displayed. Turn the volume knob to cycle through the list
of files.
Note:
Pressing
GO BACK
when viewing the contents of a
folder will return to the list of folders on the USB device.
Press
GO BACK
again to exit the search menu.
Once the desired song is displayed, press
SELECT
to
begin playback of the desired song.
Note:
Due to differences in USB device transfer speeds,
it is recommended to limit each folder to less than 30
songs.
Connecting a
USB Device
(sold separately)
Playing Music
Track Select
Fast Forward and
Reverse
Pause
File Search
Step 1
Step 2
Step 3
