6
MXD55
OPERATION
General Operation
Press and hold
DISP
then press
TUNE
ll
to select function
priority display. "FREQ" will momentarily appear in the display.
Radio frequency (tuner modes) or CD elapsed time/track (CD
player mode) will be displayed by default. Clock is accessed
by pressing
DISP
momentarily.
Press and hold
DISP
then press
TUNE
nn
to select time
display priority. "TIME" will momentarily appear in the display.
Clock will be displayed by default. Radio frequency or CD
elapsed time/track is accessed by pressing
DISP
momentarily.
Programs unit to display clock/no clock when unit is off.
Press and hold
MODE
then press
PRESET 1
to turn clock
priority on/off. "ON CLOC" or "NO CLOC" will momentarily
appear in the display.
Press and hold for more than 2 seconds to
RESET
the unit
upon initial installation or if abnormal operation occurs. The
RESET
button is located behind the faceplate.
Press rotary encoder to select between Volume (default),
Bass, Treble, Balance & Fader.
Press rotary encoder until
BAS
appears then rotate encoder
left/right to adjust (-6 minimum / +6 maximum).
Press rotary encoder until
TRE
appears then rotate encoder
left/right to adjust (-6 minimum / +6 maximum).
Press rotary encoder until
BAL
appears then rotate encoder
left/right to adjust (L12-0-R12) 00 represents equal balance.
Press rotary encoder until
FAD
appears then rotate encoder
left/right to adjust (R12-0-F12) 00 represents equal fader.
Individual Bass and Treble settings are retained in memory
for AM, FM, Weatherband, CD, and AUX modes. This allows
you to save the Bass and Treble settings separately for each
mode. For example, FM tuner mode can have Bass +3 and
Treble -1 while CD mode can have Bass +2 and 2.
Programmable Display
Priority
Programmable Clock
Priority
Reset
Audio
Bass
Treble
Balance
Fader
Source Audio Memory
