background image

9

Thiswarrantygivesyouspecificlegal

rights.Youmayalsohaveotherrights

whichvaryfromstatetostate.

DualElectronicsCorp.warrantsthis

product to the original purchaser to be free 

from defects in material and workmanship 

for a period of one year from the date of 

the original purchase.

DualElectronicsCorp.agrees,atour

option, during the warranty period, 

to repair any defect in material or 

workmanshiportofurnishanequal

new, renewed or comparable product 

(whicheverisdeemednecessary)in

exchange without charges, subject to 

verificationofthedefectormalfunctionand

proofofthedateofpurchase.Subsequent

replacement products are warranted for 

the balance of the original warranty period.

Who is covered?

 This warranty is extended 

to the original retail purchaser for products 

purchased from an authorized Dual dealer 

andusedintheU.S.A.

What is covered?

Thiswarrantycoversall

defects in material and workmanship in 

thisproduct.Thefollowingarenotcovered:

software,installation/removalcosts,

damage resulting from accident, misuse, 

abuse, neglect, product modification, 

improperinstallation,incorrectlinevoltage,

unauthorized repair or failure to follow 

instructions supplied with the product, or 

damage occurring during return shipment 

oftheproduct.Specificlicenseconditions

and copyright notices for the software can 

befoundviawww.dualav.com.

What to do?

 

1.Beforeyoucallforservice,checkthe

troubleshootingguideinyourowner’s

manual. A slight adjustment of any 

customcontrolsmaysaveyouaservice

call.

2.Ifyourequireserviceduringthe

warranty period, you must carefully 

packtheproduct(preferablyinthe

original package) and ship it by prepaid 

transportation with a copy of the original 

receipt from the retailer to an  

authorizedservicecenter.

3. Please describe your problem in 

writing and include your name, a 

returnUPSshippingaddress(P.O.Box

not acceptable), and a daytime phone 

number with your shipment.

4.Formoreinformationandforthe

location of the nearest authorized 

servicecenterpleasecontactusbyone

ofthefollowingmethods:

•Callustoll-freeat1-866-382-5476

[email protected]

ExclusionofCertainDamages:This

warrantyisexclusiveandinlieuofany

and all other  warranties, expressed or 

implied, including without limitation the 

implied warranties of merchantability and 

fitness for a particular purpose and any 

obligation, liability, right, claim or remedy 

in contract or tort, whether or not arising 

fromthecompany’snegligence,actual

orimputed.Nopersonorrepresentative

is authorized to assume for the company 

any other liability in connection with the 

saleofthisproduct.Innoeventshallthe

company be liable for indirect, incidental or 

consequentialdamages.

Limited One-Year Warranty

WARRANTY

Summary of Contents for ALB10













Reviews: