6. Engine Start Up / Shut Down Procedure
• Consult the accompanying Honda user manual for full engine checks and start up and
shut down procedure
Note – Before starting and after stopping the Washer depress the lance trigger to
release system water pressure.
＊
Read and understand the Owner’s Manual before operating the engine.
Safety! be careful!
How to start
1
2
Choke ON/OFF
3
Throttle lever
5
Start
6
Fuel cock ON
4
（
Choke off
）
7
Check engine oil
Switch ON
Safety! Be careful!
Safety! Be careful!
Do not use inside house
Do not use inside house
Quick Reference Guide
Quick Reference Guide
for Operation
3 4 7
6
1
2
1st step
1st step
2nd step
2nd step
Cold
Hot
Fill the oil to
the upper limit.
©Honda Motor Co., Ltd.2012
S2Z0T100
5
2
How to stop
5
MIN
MAX
MAX
GX120-GX390
GX120-GX390
793-1230
Warning – Chemicals can damage the pump and
components.
The Washer must be flushed through with clean water after every period of use
as chemicals and detergents can corrode the components.
!
7. Operating Information
Initial Priming
• Ensure the suction filter is fully submerged in the supply tank
• Hold lance trigger open and wait for water to make it’s way up the suction hose and in to
the Washer.
• After initial priming from the water supply tank the Washer is ready to run.
5