5. Pre-Operation Set Up
• Unpack and make sure that the Washer is complete and undamaged. If the Washer
appears damaged in any way, do not use the machine and consult your dealer.
• Check engine oil is at correct level as specified in the engine manufacturer’s handbook.
Warning – Engines are not shipped filled with oil
The engine will not start until oil is added. Incorrect engine oil level can result
in serious damage.
• Connect the suction hose & filter assembly (item 11, fig 2) to the inlet feed coupling
(item 8, fig 1). Ensure the connection has no air leaks and submerge the filter in water
supply tank. For optimum performance ensure the supply tank is above the Washer to
aid priming and water supply. Ensure the filter is always below the water level.
• Connect the bypass hose (item 12, fig 2) to the bypass outlet on the pressure regulating
valve (item 10, fig 1) and put other end in to the top of the water supply tank.
• Connect the delivery hose (item 13, fig 2) to the delivery outlet (item 9, fig 1).
• Connect the gun and lance assembly (item 14, fig 2) to the delivery hose
• Fit desired quick release nozzle (item 15, fig 2) to the lance assembly outlet. The Washer
is supplied with a selection of nozzles to give different fluid projection.
!
Figure 3. Piped up washer
4