background image

9.   

Fault Finding

  Symptom 

Possible Cause 

  Remedy

  Pump running normally  

Lance in low pressure mode    Check and adjust

  but pressure low. 

Pressure Regulator valve 

  Check and adjust

   

Pump sucking air. 

  Check water supply and 

   

 

  possible air ingress.  

  Nozzle badly worn 

 

  Check and/or replace

   

Worn piston packing 

  Seek professional advice

  

  Fluctuating pressure 

Blocked water filter 

  Check filter, clean or

   

 

  replace if necessary.

   

Pump sucking air 

  Check integrity of suction

   

 

  hose and connections.

  Pressure low after a long  

Nozzle badly worn 

  Check and/or replace

  period of normal use. 

 

  Pump noisy. 

Pump sucking air 

  Check integrity of suction 

   

 

  hose and connections.

   

Excessive temperature of 

  Reduce temperature to 

   

liquid in pump 

  below 60ºC, do not allow

   

 

  pump to idle for long 

   

 

 periods.

   

Worn bearing or valves 

  Seek professional advice

  Presence of water in oil. 

Ingress through breathers 

  Replace oil, do not wash  

   

 

  engine or pump 

 

    

Worn oil seals 

  Seek professional advice

  Water dripping from under pump.  Worn piston packing 

  Seek professional advice

  Oil dripping from  

Worn oil seal 

  Seek professional advice

 pump/gearbox/engine.

  Excessive vibration in  

Water supply low 

  Check adequacy of water  

  lance/delivery line. 

 

  supply. Ensure suction 

   

 

  filter is below water level.

   

Ingress of air into suction  

  Check integrity of suction

   

line 

  hose and connections.

   

Irregular functioning of  

  Seek professional advice

  

valves

Summary of Contents for CF10135PHR
















Reviews: