WFPF3800
4
V4.2L
Proper Installation
Please read all instructions, specifications, and precautions before installing and using your water filter system.
This filter must be protected from freezing, which can cause cracking
of the filter and water leakage.
CAUTION
Precautions:
For cold water use only.
After prolonged periods of non-use (such as during a vacation), it is recommended that the system be flushed thoroughly. Let water run for
10 minutes before using.
The filter cartridges used with this system have a limited service life. Changes in taste, odor, and/or flow of the water being filtered indicate
that the cartridge should be replaced.
Do not install where system will be exposed to direct sunlight.
Your water filtration system will withstand up to 100 psi water pressure. If your house water supply pressure is higher than 100 psi, install a
pressure reducing valve before the system is installed.
Before You Begin
n
Locate the main water supply line to your home and check to see what type of plumbing is in place (ex: plastic, copper, galvanized).
The main water supply line is typically located in a basement, crawlspace or garage. Connect to cold water line only.
n
Measure the diameter of the existing pipe to determine what size fittings and/or valves (not included) will be required.
n
Choose a location in the main supply line to install the Filter System. Make sure to place the Filter System in an area after the water
meter or pressure tank and before the water heater. Also select a location that will be easily accessible when changing filter cartridges.
n
Consult your local plumbing codes and install accordingly.
