3-2
Control panel
Status of nonwoven (NW), PET and Waste
During processing, the amount of used nonwoven
(NW) and PET is checked automatically and
registered in the software statistics files.
When time for change of either the NW or PET is
near, the software will raise an alarm on the control
panel.
Likewise with the accumulated amount of waste
rolled up on the waste roller, the software will raise
an alarm when the waste roll approximates the
maximum diameter allowed.
Status of each of the rolls can at any time be
viewed by pressing either of the status fields for
NW, PET or Waste on the graphic touch panel.
Web change indicators
Status colors below refers specifically to web status.
Color
Alarm
Action
Alarm history log
Green
Roll diameter is
sufficient.
No action needed.
No alarm history log.
Yellow Roll diameter is close
to reach its:
Min. limit - PET &
NW
Max. limit - Waste
Processing still possible.
Change roll after processing.
If the alarm is raised
during processing,
the alarm will appear
as a yellow alarm in
the alarm history log.
Red
Roll diameter is
critical.
The process cycle
will stop after
completion of the
current cycle and the
plate will be ejected
automatically.
Operator will be prompted immediate action.
If the alarm occurs during a processing
cycle, make a note of the cycle number!
Change of roll is required immediately and
before restarting the process.
Confirmation of alarms.
Initialization is needed after web change
and confirmation of alarms.
If resuming processing of a partially
processed plate, reload the plate and enter
the cycle number that was about to start,
when the plate was ejected. Press the
'Start' button to resume the process.
If the alarm is raised
during processing,
the alarm will appear
as a red alarm in the
alarm history log.
For general information of alarms please refer to "Alarms" on page 3-7, and for a complete alarm list please
refer to the "Alarm list" on page A-1.
Operation Manual
|
Cyrel FAST 2000TD
January, 2020
Summary of Contents for Cyrel FAST 2000TD
