8- DMX Addresses
XR250WASH can be used in three different modes: 8, 10 or 14 DMX channels.
If you want to use a DMX controller with 8 channels, select the 8 CH mode from the
MODE menu and set the following addresses:
Projector 1 A001
Projector 2 A009
If you want to select the next projector, just add “8”
Projector 3 A017
…..
A….
projector 6 A041
If you want to use a DMX controller with 10 channels, select the 10 CH mode from the
MODE menu and set the following addresses:
Projector 1 A001
Projector 2 A011
If you want to select the next projector, just add “10”
Projector 3 A021
…..
A….
Projector 6 A051
If you want to use a DMX controller with 14 channels, select the 14 CH mode from the
MODE menu and set the following addresses:
Projector 1 A001
Projector 2 A015
If you want to select the next projector, just add “14”
Projector 3 A029
…..
A….
Projector 6 A071
The address that has to be set on each projector generally depends on the number of
channels that the DMX mixer allots it.
If you have a 12 channel controller, set your XR250WASH to 10 CH MODE. The first
projector will have an A001 address and if you want to select the next projector, then
you have to add 12. The subsequent address will then be A0013
1) Press the UP-DOWN key until you reach the required DMX number. The numbers on
the display will start to flash (but the new DMX address hasn't yet been set).
2) Press ENTER to confirm your selection. The numbers on the display will stop flashing
and the projector is now controlled by the new 512 DMX number.
WARNING: if you press the UP-DOWN keys together the channels are calculated more
quickly and you get a faster selection.
8.1 Changing the DMX address
7
XR250
W A S H