DTS Synergy 5 Spot, User Manual, Page: 16 / 52

16
11.1-DMX Addresses
SYNERGY 5 SPOT can be controlled with 37 DMX channels.
In order to use the unit in 37 DMX channels mode, set the following addresses on the
mixer:
Projector 1 A001
Projector 2 A038
If you want to select the next project
or, just add “37”
Projector 3 A075
…..
A….
projector 6 A186
11.2-Selecting the DMX address
1) Press the UP-DOWN key until you reach the required DMX channel. The numbers
on the display will start to flash (but the new DMX address hasn't yet been set).
2) Press ENTER to confirm your selection. The numbers on the display will stop
flashing and the projector is now setted to the new DMX address.
TRICKS:
If you keep pushed the UP or DOWN keys, the channels are calculated more quickly
and you get a faster selection.