SMS-2K-1 Digital Cinema Server Maintenance Manual
Version 1.0
If one shock mount is not properly attached, use your fingers to fix them as illustrated below:
Pull gently on the shock mounts
with your fingers
Figure 21: 2U Fan Shock Mounts Re-attachment Example
In case shock mounts need to be replaced, please refer to document called “Digital Cinema
Server Fan Shock Mounts Installation Procedure” (document number D2K.DP.000223.DRM) to
find additional guidance.
5.1.4 Noise from Fans and Rattling
Power on the unit while on the desk with the lid opened.
Listen to the noise (if any) coming from fans.
If such noise is coming from fans, the corresponding fan can be located by removing one by one
the fan connectors. When the connector corresponding to the noisy fan is removed, the noise
should stop.
One fan’s connector
removed
Figure 22: Fan’s Connector Removal
Then replace the fan with a fan having the same Part Number.
In this case, please refer to document called “Digital Cinema Server Fan Shock Mounts
Installation Procedure” (document number D2K.DP.000223.DRM) to find additional guidance
about how to shock mount new fans.
Note
: If a fan rattles (or vibrates), you should replace it to avoid damage to the hard drives.
19
Document #: 9301H29500V1.0
