SMS-2K-1 Digital Cinema Server Maintenance Manual
Version 1.0
4 Required Tools
To be able to perform the procedure detailed in this section, the specific tools presented below
will be required.
4.1 Screwdriver
A Phillips tip screwdriver is required to remove the Digital Cinema Server lid:
Figure 1: Phillips Tip Screwdriver
4.2 Pliers
In case fan shock mounts have to be replaced or correctly re-attached, pliers might be needed.
Pliers example is presented below:
Figure 2: Pliers Example
4.3 Soft Brush
A soft brush will be required to remove the dust from concerned parts – to be used with the
vacuum cleaner.
Figure 3: Soft Brush Example
12
Document #: 9301H29500V1.0
