SLICE Free Motion
Headform User’s Manual
January 2018
12
(Rev. 0)
9.
Open the
tab. Complete the test set-up information (data collection
mode, length of time, sample rate, etc.).
10.
Click the Auto-Arm button. Click OK.
11.
Close SLICEWare and disconnect cable from the backplate.
12.
To arm the system, press and hold the LED/pushbutton switch for >3 sec. After
7 sec, the LED will begin to blink, indicating the system is performing the auto-
arm initialization sequence. After 32 sec, the LED will be either on (Circular Buffer
mode) or off (Recorder mode).
