DTS SCENA LED 120 HQS, User Manual, Page: 20 / 32

20
MAIN MENU LEVEL 1 LEVEL 2 LEVEL 3 FUNCTION
   
Display normal orientation for
floor mounting position (Default)
  Display inverted orientation for
suspended mounting position
  
Display stand-by disabled
(Default)
 
Display goes OFF after 10 seconds
  Display forced OFF even if control
signal is missing or error messages
are shown.
   
Allows to select 10 DMX
channels mode (Default)
  
Allows to select
“RGBA” mode (4
DMX channels).
  
Allows to select 6 DMX channels
mode.
  
Allows to select
“FINE” mode (10
DMX channels).
  
Allows to select
“PROM” mode (11
DMX channels).
   
Allows to select the value of the
delay (in milliseconds) for Dimmer
channel reaction to DMX or
Program variation.
Off = Instant response to DMX
variation.
4 = 100 ms Smooth response to
DMX variation (Default)
20 = 500 ms Smooth response to
DMX variation.
  
Allows to select Quadratic
current output for LED (Default).
  Allows to select Linear light output.
 
Allows to set S-curve to emulates
light intensity characteristics of the
tungsten halogen lamps.
 
Allows to set gamma curve 2.2 .
  
Allows to adjust the PWM
frequency value (Hz) in order to
reduce flickering in the process of
your camera recordings.
Range = 610
– 5000 Hz
Default = 1000 Hz
  
Allows t
o increase the LED’s
current from 70% to 100%
Default = ON
 
“COMP” GRAPHICS: