fpv
RAcing
Equipment Required
(Aircraft / Multicopter system)
Transmitter -
6 Channel or above
Receiver - 6 Channel or above, PPM,DSM,SBUS signal
FPV Goggle
Balance Charger
3 cells or 4 cells Li-po Battery
Flight Steps
1. Install Receiver (self-provided) (Please refer to P.2 - Intall Compatible RC Receiver) to quad
2. Install Battery (self-provided) (Please refer to P.1 - Battery Installation)
3. After binding (self-provided) Receiver and Transmitter (self-provided), please go to the
pre-flight check (Please refer to P.9 - Pre-flight check)
4. Install Props (Please refer to P.19 - Main Blade Assembly Introduction)
5. Motor Unlock (Please refer to P.13 - Motor Unlock)
Motor Unlock
After Binding, Place the throttle stick at the bottom and push the aileron stick to the rightmost for at least
3 second . Then release.
Mode 1
Mode 2
Aileron Stick Throttle Stick
Throttle/Aileron Stick
13
