6
Pull
1): Loose the screw located on the rear side of the unit.
2)Open the top rear cover and insert the lamp.
Close the cover and replace the screw. No lamp allignment needed
4- VOLTAGE AND FREQUENCY:
Profilo 500 can operate at 230V 50 - 60 Hz.
5- INSTALLATION:
PROFILO 500
The lamp used is manufactured from quartz glass and should be handled with care. Always adhere to
the instructions supplied in the lamp's packaging. Never touch the glass directly but use the tissue
provided in the lamp's packaging. The GX 9.5 lampbase is symmetrical.
DO NOT USE UNDUE FORCE ON THE GLASS. In case of difficulty, re-read the instructions and
repeat the procedure.
may be either floor or ceiling mounted.
For ceiling mounted installations, we reccomend the use of appropriate clamps to fix the unit to the
mounting surface.A safety cable must always be present
PROFILO 500