DTS NicKWash 600, User Manual

Page: 12 / 36

11.1-DMX Addresses
11.2-Selecting the DMX address
1) Press the UP-DOWN key until you reach the required DMX channel. The numbers on the display will
start to flash (but the new DMX address hasn't yet been set).
2) Press ENTER to confirm your selection. The numbers on the display will stop flashing and the
projector is now setted to the new DMX address.
TRICKS:
if you keep pushed the UP or DOWN keys, the channels are calculated more quickly and you get a
faster selection.
NICK WASH 600 can be used in 2 different DMX modes: 17 DMX control channels (default for NO FAR
models) , 20 DMX control channels (default for FAR model).
Here below is described the DMX channels addressing for the controller when NICK WASH 600 is set to
17 and 20 DMX control channels :
17 channels mode (default for NO FAR models)
Projector 1
A001
Projector 2 A018 If you want to select the next projector, just add “17”
Projector 3 A035
….. A….
projector 6 A086
20 channels mode (default for FAR model)
Projector 1
A001
Projector 2 A021 If you want to select the next projector, just add “20”
Projector 3 A041
….. A….
projector 6 A101
Please refer to an authorised D.T.S. service centre.
D.T.S. Firmware upgrade utility program.
D.T.S. Firmware upgrade utility
12 FIRMWARE UPDATING
Warning:
This procedure require a base knolewge of computer applications and Windows
Hyperterminal program.
To update the software version of the NICK WASH 600 you will need:
D.T.S. RED BOX interface (D.T.S. Code: 03.LA.008).
USB-DMX Driver for the D.T.S. RED BOX interface .
(The driver and the installation procedure are available in our web site www.dts-lighting.it)
Updating the software version.
Please follow the procedure below to perform the update:
1. Install the D.T.S. RED BOX USB-DMX driver on the PC you will use to update the unit software.
2. Connect the D.T.S. RED BOX interface to the PC by using a USB cable.
3. Connect the D.T.S. RED BOX interface to the fixture by using a DMX cable.
4. Download the new software version into the unit by using
program.
ARC 1200
12
!
NICK WASH 600